Automotive

Home/Posts/Automotive

Business Benefits: ATS Inspect in the Automotive Industry

13 business benefits of performing a digital transformation of your visual inspection processes in the Automotive Industry. It's Time for a Change Contact Us for More Information If you're still recording inspection results on paper before entering it in a spreadsheet, or receiving quality reports when the information is no longer useful, then your visual [...]

Business Benefits: ATS Inspect in the Automotive Industry2019-09-23T09:39:58+00:00

Digital Transformation of Quality Processes at US Automotive Manufacturer

Automotive OEM reduces warranty claims with digital transformation of quality processes. Purpose This OEM customer, based in the US, needed to reduce the number of warranty claims they were receiving while also tackling the growing challenges of mass customization across the supply chain. To achieve this they wanted to carry out a digital transformation of their [...]

Digital Transformation of Quality Processes at US Automotive Manufacturer2019-04-09T15:25:05+00:00

ATS Provides Support Services to a Leading Automotive Body Panels Producer in the Netherlands

Purpose Support service for Siemens SIMATIC IT Products Project Scope Production site in the Netherlands Support service for MES Solution Approach ATS Global Team (MES Experts) Provide support for management & maintenance of SIMATIC IT Production Suite (MES) through corrective maintenance, preventive maintenance and (ad hoc) modification The Results Improved shop-floor productivity Increased plant uptime Improved [...]

ATS Provides Support Services to a Leading Automotive Body Panels Producer in the Netherlands2019-04-09T15:25:05+00:00

Project DNOx 5.Q, LQTTB station

Purpose Verification of LQT sensors (level, concentration, temperature). These sensors are used for AdBlue parameter measurement Project Scope SENT (Single Edge Nibble Transmission) protocol decoding High accuracy positioning (± 0.01 mm) during level value testing and high resolution temperature measurement Communication with a variety of devices (NI cDAQ, Rohde&Schwarz power supply, Pico temperature data logger, Votsch [...]

Project DNOx 5.Q, LQTTB station2019-04-09T15:23:25+00:00

QMS Integrated into Robotic Welding and Painting Process at a Global Car Manufacturer

Purpose A global car manufacturer was on a mission to perfect its robotic welding and painting process. It wanted to achieve this by utilising an automated self-correction process that would produce high quality assembly welds with no defects. Project Scope The project was centered around the creation of a robust system to monitor events and generate [...]

QMS Integrated into Robotic Welding and Painting Process at a Global Car Manufacturer2019-04-09T15:22:52+00:00

Automotive Manufacturer Chooses ATS for Dimensional Scanning Solution

Due to the exceptional quality and service that the ATS Dimensional Engineering group has provided, it has been awarded a repeat three year contract with a major automotive customer.ATS has an ongoing order with the customer for our onsite engineering services as well as the rental of our dimensional scanning equipment. This order covers a multitude [...]

Automotive Manufacturer Chooses ATS for Dimensional Scanning Solution2019-04-09T15:22:36+00:00

Headlights Manufacturer Chooses ATS for Assembly Line Implementation

This international automotive supplier produces exterior lighting for passenger cars and commercial vehicles. They are currently expanding and have asked ATS to deliver full assembly lines for two types of automotive headlight.The company chose ATS thanks to the close working relationship that had built up as well as the excellent references from previous projects. They [...]

Headlights Manufacturer Chooses ATS for Assembly Line Implementation2019-09-26T11:18:59+00:00

North American Automotive Manufacturer Chooses ATS for CM4D software

ATS has received a substantial order for ATS CM4D software at two plants in the USA and Mexico. This is the second phase of an ongoing ATS ADOS implementation at the customer which currently uses Inspect at three of its plants. Two of the plants will now deploy ATS CM4D within the warehouse to analyze the [...]

North American Automotive Manufacturer Chooses ATS for CM4D software2019-04-09T15:21:35+00:00

Manufacturer of Electric Cars Chooses ATS CM4D for Dimensional Validation

For this deployment US based electric carmaker has chosen ATS CM4D which compares the fit of two mating parts and allows them to apply “virtual shims”. This combination of features is unique to ATS CM4D as well as a wealth of other features comparing the virtual design to the actual physical product, the ability to produce [...]

Manufacturer of Electric Cars Chooses ATS CM4D for Dimensional Validation2019-04-09T15:21:20+00:00

Global Car Manufacturer Chooses ATS Inspect for Visualisation and Traceability

Customer's Engine and Powertrain Plant in Turkey manufactures engines which are sent to their other facilities internationally. A project was recently completed to make ATS Inspect the standard visualisation platform of their door to door processes allowing them to see the full details of all their production and pin point the root cause of problems instantaneously. [...]

Global Car Manufacturer Chooses ATS Inspect for Visualisation and Traceability2019-04-09T15:21:20+00:00