22/7/2008
ATS plans August 2008 Workshop Tour in Melbourne and Sydney
ATS has planned 4 Lean Six Sigma and Simatic IT Seminars in August 2008, starting with the first one on 14 August in Melbourne. Some important Lean & Six Sigma practitioners and executives will be attending this first workshop.
Intended as a Lean refresher or introduction for executives and practitioners this session will be drawing on best practices from SCA Packaging, Rolls-Royce Aerospace, The Nut Company and Toyota amongst others. These events are designed to educate on the continuous improvement initiatives and Manufacturing Execution Systems.
Mike James, Group Managing Director of ATS International B.V. and Director at Large of MESA Europe is coming over from Europe. Mike will be the moderator and expects a lively debate during the workshops.
Overview Tour:
| SEMINAR |
DATE |
LOCATION |
Lean Manufacturing & Six Sigma Workshop
ATS Simatic IT Breakfast Seminar, the good, the bad and the ugly
MES Implementation Experiences Workshop
ATS Simatic IT Breakfast Seminar, the good, the bad and the ugly
|
14 August 2008
15 August 2008
19 August 2008
20 August 2008
|
Melbourne
Melbourne
Sydney
Sydney
|
-
ATS Applied Tech Systems is proud to exhibit at the CastExpo 2013 in St. Louis, MO from April 6 to 9, 2013. During the largest trade show for metal casting in North America, ATS will share the best practices achieved with the use of ATS software products in world-class manufacturing companies in the industry. Visit us at booth number 1570.
[...]
-
Powerful, 3D Model-Based Inspection Meets Flexible, Automated Reporting
[...]
-
ATS International B.V. is proud to announce the release of ATS Inspect 5.5. ATS Inspect is our quality control software for attribute and variable data collection in manufacturing. It’s designed to reduce the costs associated with scrap, rework, warranty claims and production bottlenecks in many different fields of manufacturing. Working in unison with existing systems it will raise the quality of the manufacturing process and the final product.
[...]
-
ATS International B.V. announces the release of the new version of their Product Quality Validation Software. As the inaugural release of CM4D by ATS, v19.1 provides enhanced performance capabilities that will allow you to retrieve your inspection data, generate critical quality reports, analyze production problems, and prevent build issues more efficiently.
[...]
-
ICT Automatisering (ICT) today announced it has reached agreement on 1 December 2012 to transfer its activities in Neustadt, Germany, including all employees working for the Neustadt office, to ATS GmbH in Kassel. ATS GmbH is part of ATS International B.V., an independent solution provider for global manufacturing IT services headquartered in Haarlem, the Netherlands.
[...]
-
ATS is pleased to welcome our new team in Neustadt, Germany to ATS. The team has been transferred from ICT Automatisering and will strengthen ATS Germany with a highly skilled group of industrial automation professionals.
[...]
-
Press Release: ATS’s Global expansion continues with the opening of a new office in Singapore which is now fully operational.
[...]
-
ATS International B.V., The Netherlands has acquired the business and assets of the CM4D software and professional engineering services operations from QMC, Inc., USA.
[...]
-
ATS is proud to welcome our new expert colleagues in Detroit, USA and Hull, England joining us from QMC. We have already started promoting the remarkable ATS CM4D software globally with Mike James’s current visit in China. More news to follow …
[...]
-
I recently attended an Automotive conference where the presenter talked about Straight Through Ratios (STR). What he meant was a vehicle that went through the full assembly process without a single fault being detected.
[...]
-
As an IACET Authorized Provider, MESA International offers CEUs for its programs that qualify under the ANSI/IACET Standard.
[...]
-
ATS is proud to announce the release of ATS Inspect 5.4. Our researchers and developers have worked closely with existing customers while listening to the needs of industry as a whole. In this way we have been able to develop new functionality and improve usability, helping to keep ATS Inspect at the forefront of attribute and variable data collection.
[...]
-
We are pleased to announce the first order of ATS Inspect in the white goods or appliance manufacturing industry for Whirlpool in Mexico. It is initially implemented in a refrigerator production line before expansion throughout the rest of the plant.
[...]
-
Having seen ATS Inspect in action in their North American automotive plants, a leading car manufacturer has teamed up with ATS for deployment in their Mexican plants. They were impressed by the benefits of the system which led directly to the North American manufacturer winning the JD Power Initial Quality Award and placement of their product at the top of the Consumer Reports ratings.
[...]
-
One of the world's largest packaging producers has just made an order for ATS Inspect at one of its UK sites where it manufactures high quality paper cups for the UK hot and cold drinks market. Quality assurance on such precision made, high volume products is critical.
[...]
-
A new order has just been placed for ATS Inspect at a plant in Scotland.
[...]
-
We’re happy to announce that we’ve just received an order to implement ATS Inspect at a medical device manufacturer in Ireland.
[...]
-
The Manufacturing Enterprise Systems Association is a global member organisation of manufacturers, solutions providers and system integrators.
Jan Snoeij, Senior MES Consultant at Logica, the previous Chairman has presided over an auspicious period of growth and now hands the baton over to Mike James who has been Vice-Chair for the last year.
[...]
-
ATS International B.V., an independent solutions provider for manufacturing companies has acquired OceanModus Ltd to form ATS Applied Tech System Ltd. (ATS Ireland) and will be operating from Cork.
[...]
-
ATS is proud to announce the release of ATS Inspect 5.4. Our researchers and developers have worked closely with existing customers while listening to the needs of industry as a whole. In this way we have been able to develop new functionality and improve usability, helping to keep ATS Inspect at the forefront of attribute and variable data collection.
[...]
-
ATS continues to broaden its solution offerings through its collaborative relationship with Eines. Eines is a leader in non contact attribute and variable measurement systems with particular emphasis in the automotive and aerospace industries.
[...]
-
Please note our new address in Haarlem, The Netherlands.
[...]
-
Growth in both ATS’s traditional automation market and the MES market is above 20% this year and coincides with ATS’s 25 year anniversary. Under the banner of 25 Years of Experience the company is emphasising its role as a knowledge company sharing best practices and technology trends with customers across the globe. Founded in 1986 in The Netherlands the company is still privately owned and its consistent strategy, high ethical standards, focus on customer satisfaction and concern for employee development and welfare means the business has one of the highest employee retention rates in the industry.
[...]
-
The pharmaceutical and life science community in Belgium and the Netherlands will gather for biannual event. The conference programme will highlight technology and business trends in R&D, pilots, upscaled production and distribution, including speakers from ING, Merck, Crucell, Wageningen UR, MESA International, Genth University, Synthon and Prosensa.
[...]
-
The Keynote presentation at the 2011 MESA North American Conference will be presented by Chris Gaffney, Senior Vice President Product Supply System-Strategy, Coca-Cola Refreshments. Hear Mr. Gaffney talk about end-to-end business processes, touching supply chain and manufacturing operations.
[...]
-
ATS is launching the MES Global Education Program for new talent across the ATS MES Excellence Centres in Europe, North America and Asia Pacific.
[...]
-
ATS has developed generic Filling and Packaging solution based on the world leaders Siemens Simatic IT MES products. The solution is generic and allows for rapid deployment within your existing manufacturing environment. Typical roll-outs can be accomplished in as short a period as 8 weeks.
[...]
-
DSM Dyneema is implementing a Manufacturing Execution System (MES) in their global manufacturing sites. This system connects the manufacturing process to the supply chain management system and is used by DSM Dyneema to improve response to demand, manufacturing efficiency and quality. There is complex interfacing with the physical control layer and the business management layer where the real-time world of production has to interface with DSM’s IT systems.
[...]
-
We're pleased to announce that the MESA community is stepping forward once again. MESA is engaging some of the foremost experts from across the Operations Management landscape to lead the knowledge sharing within the industrial community by offering MES/MOM* educational events across four continents.
[...]
-
ATS is proud to announce the release of ATS Inspect version 5.3. ATS endeavours to work as closely as possible with customers that have already purchased the product and used it to enhance their production methods. By doing so the product can be adapted to new styles of working while incorporating emerging technologies.
[...]
-
The Keynote presentation at the 2010 MESA European Conference was Process Efficiency by Integration, presented by Stefan Rosenwald, Senior Manager IT Powertrain, Daimler Engine.
[...]
-
MESA launched an Education Program for MES users and potential users. The program is a blended training program - this means that the training can be followed on the internet and in the classroom.
[...]
-
ATS developer discovers a quick, easy way to put live process data into Android phones and other devices using the OPC DataHub.
[...]
-
ATS is proud to announce the release of ATS Inspect version 5.2. The latest version comes as a result of listening to customer ideas and market requirements. Customers with valid SMAs can contact us to receive a copy.
[...]
-
Inspect to be showcased at MESA 2010 Conferences. Current user will present quality improvements in Detroit, U.S.A. and in Düsseldorf, Germany .
[...]
-
ATS Inspect is used at Honeywell for aircraft engine inspection. The global project involves facilities in the US and Hong Kong. Pilot program will expand to full implementation at the manufacturing centers.
[...]
-
Inspect vision system at Chrysler improves quality in Fiat 500. The system checks critical characteristics of the urethane application process in the windshield, backlight and quarter glass. Inspect’s visual interface indicates exact location of non-conformance to operator.
[...]
-
ATS’s Global expansion continues with the opening of a new office in Ankara, Turkey.
The new training centre in Ankara offers standard & custom made training courses for maintenance, engineering or information management and also runs a world-wide Training Certification program for life-long learning.
[...]
-
ATS’s position as a world leading independent solution provider in this market is reflected in the work being completed by Mike James, Group Managing Director of ATS and Board Director of MESA EMEA Region. Peter van Vliet from SAP and Mike James are jointly responsible for the MESA Education Program being launched by MESA.
[...]
-
One of the ATS business activities is providing custom control solutions to industrial automation users. A significant amount of these solutions are build on top of the QNX real-time operating system, running on an x86 industrial platform. Besides developing control solutions, ATS software engineers also develop QNX board support packages for other hardware platforms.
[...]
-
Our results are your best guarantee! 10–25% EFFICIENCY IMPROVEMENT
[...]
-
ATS has bought the business and software of the Inspect product line. ATS Inspect was originally developed as visual defect quality tool primarily for the automotive industry. The product has since been expanded and is now used in a wide range if industries.
ATS has also opened new offices in Mexico and South-Africa.
[...]
-
Schweppes has chosen the ATS Simatic IT MES Filling and Packaging Solution. This solution was first developed in close co-operation with Siemens Genoa for Carlsberg and is now available to the general filling and packaging market as an “out of the box” solution.
[...]
-
ATS Applied Tech Systems is expanding its training portfolio with new training programmes that focus on continuous business improvement. ATS has extensive experience with the technical aspects of continuous business improvement, and by offering new trainings and workshops a holistic approach for continuous business improvement can be provided.
[...]
-
ATS Applied Tech Systems is expanding its training portfolio with new training programmes that focus on continuous business improvement. ATS has extensive experience with the technical aspects of continuous business improvement, and by offering new trainings and workshops a holistic approach for continuous business improvement can be provided.
[...]
-
”A report designed from experiences and best practices based on facts rather than opinions”
[...]
-
ATS has planned 2 MES Breakfast Seminars in March, starting with the first one on 12 March in Sydney, followed by the second on 19 March in Melbourne.
[...]
-
ATS has planned 4 Lean Six Sigma and Simatic IT Seminars in August 2008, starting with the first one on 14 August in Melbourne. Some important Lean & Six Sigma practitioners and executives will be attending this first workshop.
[...]
-
Big names such as Airbus, GE Sensing, BAE Systems, Morgan Technical Ceramics were among the attending end users.
[...]
-
MESA Plant-to-Enterprise Conference in Prague went very well. ATS was main sponsor and had invited Chris Biddle (Rolls Royce) and Grace Boldewijn (Bocari) as speakers.
[...]
-
ATS has a specific role within SAP’s partnership program to deliver connectivity to shop floor automation systems. ATS is a solution provider with a global reach and the ability to deliver local and global solutions.
[...]
-
November 2008, Nuneaton | ASI-Datamyte sells hardware, software and total solutions into the quality gauging and measurement market. During the last few years software solutions such as Visual Inspection Defect recording (Inspect) and Statistical Process Control (SPC) have formed an important part of ASI-Datamyte's sales contributing considerably to the quality management market, one of the 11 functions of Manufacturing Execution Systems (MES).
[...]
-
In September two Profibus trainings were released by ATS in The Netherlands.
[...]
-
One of ATS's key success factors is experience - and ATS has worth of it! We have over 20 years of technical training experience having trainied over 5000 technical and maintenance engineers as well as managers. With our industry specialised workshops there is no doubt we deliver quality.
[...]
-
Sharing Best Practices is probably the ideal way to decide if another company’s best practice will bring benefit to your business.
[...]
-
ATS Training: Commitment to Quality achieves 90%+ customer satisfaction rating. A combination of location flexibility, course syllabus tailoring and deep subject knowledge helped us meet our customer needs.
[...]
-
We would like to announce the release of our new combined training. After success in USA and Canada the "PLC - Allen-Bradley PLC-5, SLC500 and MicroLogix" training is now available in the UK and Australia.
[...]
-
For technicians and engineers facing the challenges of growing complexity of automation and IT-systems and industry globalisation, ATS offers a unique education program called ATS World-Wide Training Certification.
[...]
-
Implementations require long term support and ATS Maintenance and service level agreements offer an economic alternative to sustaining large in-house teams with specific expertise, only required on an occasional basis.
[...]
-
SW Installations and maintenance require long term support and software maintenance agreements offer an economic alternative to sustaining large in-house teams with specific expertise, only required on an occasional basis.
[...]
